Step 7: Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release. The option that I took, or maybe it is two options, is: I configured my DNS server with an alias that allows unifi to resolve to the UniFi Controller. Step 3: at the UniFi# prompt type “set-inform http://ipAddressOf WAP:8080/inform” and hit Enter Make sure you use port 8080 not the default port for the controller Step 4: Click on the link of the MAC address of the pending access point to adopt the device and click the adopt button. Let me start off by saying how impressed I am with the UniFi line. First, power up your AP and find its IP address. This is your option for setting them up without a UniFi Controller. If you don’t see the access point, make sure your WiFi on your mobile … It will also work for UniFi switches and USGs (UniFi security gateways) using the UniFi controller. Click "Execute" That would be great to be able to manage the AmpliFi through the Unifi Controller. dem Gerät); Rufe anschließend putty auf Verbinde dich nun per SSH zum Access Point, nutze dabei folgende Anmeldedaten (im Auslieferungszustand, ansonsten Geräteadministrator vom Controller) Benutzer: ubnt … Log in. Unifi APs Since it's my only Unifi device so far, I've just been managing it via the Android app as a standalone device, which has been mostly fine. In the upper right corner, tap "Add Controller". Group Configuration offers particular value to large-scale deployments, where … In the Discovery tool, click on the button “ UNIFI FAMILY ” to show all the UniFi devices on your local network. Danach sollte der AP im neuen Controller anlern- und konfigurierbar sein. As this is the only equipment I have, and that the controller software is running inside of a Windows VM, the process for adopting the equipment to the controller is slightly different than if you were to have a gateway or cloud key. How To Migrate/Move Ubiquiti Unifi Access Point to a New … Adding standalone devices to controller : Ubiquiti